HXF58 VARIABLE DISPLACEMENT PUMP INJECTION MOLDING
HXF-V is a new series, the variable displacement pump makes the hydraulic output power always matches with the system requirement. No extra-energy lost via the overflow valve. Comparing with traditional machines, energy saving efficient is around 20%-40% which causes cost reduction obviously.
Shot weight (mm)
60 - 113
Space between tie bars (mm)
310 X 310
Clamping force (KN)
580
Screw diameter (mm)
26 - 34
| DESCRIPTION | ||||
| Item | UNIT | HXF58 | ||
| INJECTION UNIT | Screw A | Screw B | Screw C | |
| Screw diameter | mm | 26 | 30 | 34 |
| Screw L/Dratio | L/D | 24 | 21 | 19 |
| Shot Volume | cm3 | 66 | 88 | 113 |
| Shot weight | g | 60 | 88 | 113 |
| (PS) | oz | 60 | 80 | 103 |
| Injection Pressure | Mpa | 2.1 | 2.8 | 3.6 |
| Injection Speed | mm/s | 245 | 184 | 143 |
| Injection Stroke | mm | 120 | 120 | 120 |
| Screw Speed | rpm | 125 | 125 | 125 |
| 0~220 | ||||
| CLAMPING UNIT | ||||
| Clamping force | KN | 580 | ||
| Toggle Stroke | mm | 270 | ||
| Space between tie bars | mm | 310 X 310 | ||
| Platen dimensions(HxV) | mm | 480 X 470 | ||
| Max.Mould Height | mm | 320 | ||
| Min.Mould Height | mm | 120 | ||
| Ejector Stroke | mm | 70 | ||
| Ejector Force | KN | 22 | ||
| Ejector Number | n | 1 | ||
| OTHERS | ||||
| Max.Pump Pressure | Mpa | 17.5 | ||
| Pump Motor Power | KW | 7.5 | ||
| Heater Power | KW | 7.1 | ||
| Machine Dimensions (L x W x H) |
m | 3.9 X 1.04 X 1.78 | ||
| Oil Tank Capacity | Liter | 160 | ||
| Machine weight | Ton | 2.5 | ||
