SYNERGIC ALUMINUM MINI MIG WELDER
We all understand using the short-circuit transfer type for welding mild steel. But the PROMIG-200SYN PULSE uses spray arc transfer type (Pulsed MIG process) for all kinds of metals: stainless steel, aluminum and even mild steel! At this level, nobody in the world use the spray arc transfer type for welding mild steel, even the LINCOLN and ESAB. Because they only used it for the industrial models.
Model
PROMIG-200SYN Pulse
Rated Input Voltage
1PH ~ 230V ±15%
MAX. Load Power Capacity
8.75KVA
Rated Output
200A/24V
The peak current of PROMIG-200SYN/200SYN PULSE is up to 400Amps. Because of such a high peak current, it has enough energy to melt the wire during spray arc transfer. The real spray arc transfer forms droplet of molten metal at the end of the electrode, then just the right amount of current is added to push that droplet across the arc and into the puddle. With practicing thousands of welding jobs, the pulse curve is improved for different materials and different situations.
The 400Amps super high peak amperage could also confirm enough energy for welding mild steel with short-circuit transfer type. It could comfortably weld the 1.0mm wires (0.040in) while all the competitors’ machines only suitable for 0.6/0.8mm steel wires.
TOP FEATURES:
- The True Multi-process welder will performs MIG/MAG with solid or flux-cored wire, stick and TIG like it was born to run that process.
- Synergy with JOB-LISTS covers different metal materials, different wire diameters and different shield gases, easily welds mild steel, stainless steel and aluminum..
- Built-in featured waveform constantly monitors complex arc characteristics adapting to your technique to provide a smooth, stable arc and superior, repeatable welds..
- Dynamic Control controls the welding arc cone width, a slightly softer arc or a slightly harder arc depends on your preference and application..
- Produces less spatter..
- True high deposition rate..
- 2T or 4T selection..
- Spot welding function..
| Item No | PROMIG-200SYN Pulse |
| Rated Input Voltage | 1PH ~ 230V ±15% |
| Max. Load Power Capacity | 8.75KVA |
| Rated Duty Cycle(40°C) 60% | MIG: 200A/24V |
| MMA: 200A/28V | |
| TIG: 200A/18V | |
| MIG: 160A/22V | |
| MMA: 160A/26.4V | |
| TIG: 160A/16.4V | |
| Welding Current/Voltage Range | MIG: 10A/14.5V ~200A/24V |
| MMA: 20A/20.8V~200A/28V | |
| TIG: 5A/10.2V~200A/18V | |
| Open Circuit Voltage | 70V~80V |
| Power Factor | 0.8 |
| Efficiency | 0.8 |
| Pre-Gas Time | Preset |
| Flow-Gas Time | Preset |
| Wire-feed Mechanism | 2 Rollers |
| Wire-feed Speed Range | 2~18 m/min |
| Wire Spool Capacity | 200mm (5kg) |
| Filler Wires (mm) for Fe : | 0.6~1.0 mm |
| For Stainless steel: | 0.6~1.0 mm |
| For Aluminum: | 0.8~1.2 mm |
| Dimension | 540x230x480mm |
| Weight | 20KG |
Related Products you may be interested!
